Call +82-31-1577 - 8898


Model KF-200
Use Removal of fine dust and fume
Filter type H&V Nano filter
Filter cleaning method Auto 3D air-pulse (Need air compressor)


KF-200 mobile dust collector is to remove fume generated from welding works with ARC, CO2, MAG, Argon and dust generated from polishing, pulverizing, drilling, cutting and grinding works.



  • 3D air-pulse cleaning method
    The filter is cleaned with 3D air-pulsing which blows out the compressed air with rotating 360 degree.
    The filter can be cleaned during the collector is running (24hours continuing operation)
  • Mobile dust collector
    The flexible arm is attached, so there is no need for additional installation of hood and duct.
    It can be moved easily to any direction with 4pcs heavy load caster.
  • Applying H&V nano filter
    High durable nano fiber coating filter can hold large amount of dust.
    The lifetime of filter is extended by improving the cleaning efficiency by air pulse.
    It has 97%(1µm) filtering efficiency at 5.33cm/sec.
  • Applying German analog manometer
  • Applying Flexible Arm

    See more about Flexible Arm  

※ It can be used as fixed type connecting separate worktable instead of flexible arm.

※ It is not suitable for high temperature gas and dust mixed with large amount of water or oil.


Model Air Flow
Dimension Dust box Capa
Width Height Length
KF-200 25 230 1.5 600 915 750 11 120

※ Without the height of caster



  • Flexible conduit

  • Separate worktable

  • Available for changing the power specification : 3 phase 220V/ 380V/ 440V, single phase 220V (below 3HP)

The Right service of Clean air Tech begins

with hope to contribute to the neighbors and society through the clean environment.
Our passion does not end by the accurate and detailed design, precise production, excellent quality and best performance through the installation and construction.
It is the spirit of fulfilling responsibility to dust collectors operated all around industrial sites as the air environment specialized company.
We, the whole member of Clean air tech believe that this is customer-centric right service.


  • Diagnosing service for dust collector performance and efficiency
    CAT provides right use, performance maintenance, diagnosing service for every dust collecting facilities.
  • Round visiting check-up
    We believe that all dust collectors should contribute to the improvement of working condition.
  • Repairing and replacing service for components and consumables
    CAT after-sales service always together wherever there is a dust collector.

One-stop ServiceAir Environmental
Comprehensive Solution

Formally registered for air environmental engineering and measurement agency
We have expert technician as air environmental professional engineer who completed the curriculum of Korea Occupational Safety and Health Agency .
  • Dust collection equipment design and production
  • +
  • Environmental permits and paperwork of the hazard prevention plan
  • +
  • Measurement of air pollutants in discharge facilities
  • Agency/Sales office

    Agency/Sales office

  • Location


Online Estimate