Call +82-31-1577 - 8898

Oil-mist

Model CMC(E)
Use Removal of oil-mist
Filter type Pre-filter, Veebag filter
Filter cleaning method Filter replacing type

Introduction

CMC(E)-Series oil-mist collector is to remove large amount of water soluble / insoluble oil-mist generated
from CNC lathe, machining center and robo-drill.
The structure and performance of CMC-Series and CMCE-Series is basically same, but 3rd filter is fitted with CMCE-Series.


cmce

Features

  • Centralized system
    It is suitable for connecting to several equipments.
  • Recyclable
    Filtered oil-mist is collected on underbody by gravity and can be discharged by opening valve.
    The amount of collected oil can be checked by gauge.
  • Multi-step filter design
    Step 1, Pre-filter: Large size dust is collected by polyester pre-filter.
    Step 2. Veebag filter: Small size particles and dust mixed with water
    or oil are filtered by Veebag filter made of synthetic fiber.
    Step 3. CFM filter(only for CMCE): Smaller particles which are not filtered
    by Veebag filter are removed by glass fiber CFM filter.

※ It is not available for detaching and changing the side of inlet because it is manufactured by whole welding type for preventing oil-leaking.

Specification

Model Air Flow
(CMM)
Pressure
(mmAq)
Motor
(Kw)
Dimension
Width Length Height Inlet(Ø)
CMC(E) 200 25 230 1.5 790 720 1,550(1,760) 160
CMC(E) 300 40 230 2.2 790 760 1,650(1,910) 210
CMC(E) 500 60 230 3.7 790 760 1,737(2,137) 260
CMC(E) 750 80 250 5.5 1,500 850 1,807(2,097) 310
CMC(E) 1000 100 250 7.5 1,500 850 1,867(2,299) 360
CMC(E) 1500 160 250 11 1,650 1400 1,787(2,077) 410
CMC(E) 2000 200 250 15 1,650 1400 1,807(2,239) 460

※Without the height of caster
※( ) is the dimension of CMCE-Series



Option

  • HEPA filter(Only for CMCE)
    : For removal of small size particles

  • Flexible conduit

  • Available for changing the power specification
    : 3 phase 220V/ 380V/ 440V, single phase 220V (below 3HP)

The Right service of Clean air Tech begins

with hope to contribute to the neighbors and society through the clean environment.
Our passion does not end by the accurate and detailed design, precise production, excellent quality and best performance through the installation and construction.
It is the spirit of fulfilling responsibility to dust collectors operated all around industrial sites as the air environment specialized company.
We, the whole member of Clean air tech believe that this is customer-centric right service.

CAT RIGHT SERVICE

  • Diagnosing service for dust collector performance and efficiency
    CAT provides right use, performance maintenance, diagnosing service for every dust collecting facilities.
  • Round visiting check-up
    We believe that all dust collectors should contribute to the improvement of working condition.
  • Repairing and replacing service for components and consumables
    CAT after-sales service always together wherever there is a dust collector.

One-stop ServiceAir Environmental
Comprehensive Solution

Formally registered for air environmental engineering and measurement agency
We have expert technician as air environmental professional engineer who completed the curriculum of Korea Occupational Safety and Health Agency .
  • Dust collection equipment design and production
  • +
  • Environmental permits and paperwork of the hazard prevention plan
  • +
  • Measurement of air pollutants in discharge facilities
  • Agency/Sales office

    Agency/Sales office

  • Location

    Location

Online Estimate