Others
.png)
Model | CWC |
---|---|
Use | Removal of Flame, High temperature, Adhesive dust, Explosive dust |
Filter type | Water |
Filter cleaning method | Water replacing type |
Introduction
CWC-200 water vortex type dust collector is to remove the particles
by the vortex of water.

Features
-
- Removing flaring dust
- It can be applied to removal of flame, high temperature, adhesive dust
and explosive dust which is hard to be cleaned by filter type dust collector.
-
- Automatic water level control(Option)
- The water level sensor is operated when the water level is low.
The water is automatically supplied, so there is no need
for manual water supplying. - The contamination of water can be checked by transparent glass.
-
- Applying German analog manometer
Specification
Model | Max. Air Flow (CMM) |
Max. Pressure (mmAq) |
Motor (Kw) |
Dimension | |||
---|---|---|---|---|---|---|---|
A | B | C | D(Inlet) | ||||
CWC-200 | 30 | 280 | 1.5 | 750(1,000) | 650 | 1,681 | Ø150 |
CWC-300 | 56 | 320 | 2.2 | 1,050 | 800 | 1,640 | Ø200 |
CWC-500 | 63 | 380 | 3.7 | 1,100 | 1,000 | 1,640 | Ø250 |
※ Without the height of caster

Option
Flexible conduit
Available for changing the power specification
: 3 phase 220V/ 380V/ 440V, single phase 220V (below 3HP)Water level sensor
: Measuring the water level and supplying water automatically.Can be made by Stainless steel
ETC.
-
01
Caster (Fixed after installation)
Installation case
The Right service of Clean air Tech begins
with hope to contribute to the neighbors and society through the clean environment.
Our passion does not end by the accurate and detailed design, precise production, excellent quality and best performance through the installation and construction.
It is the spirit of fulfilling responsibility to dust collectors operated all around industrial sites as the air environment specialized company.
We, the whole member of Clean air tech believe that this is customer-centric right service.
CAT RIGHT SERVICE
-
- Diagnosing service for dust collector performance and efficiency
- CAT provides right use, performance maintenance, diagnosing service for every dust collecting facilities.
-
- Round visiting check-up
- We believe that all dust collectors should contribute to the improvement of working condition.
-
- Repairing and replacing service for components and consumables
- CAT after-sales service always together wherever there is a dust collector.
One-stop ServiceAir Environmental
Comprehensive Solution
- Formally registered for air environmental engineering and measurement agency
- We have expert technician as air environmental professional engineer who completed the curriculum of Korea Occupational Safety and Health Agency .
- Dust collection equipment design and production
- +
- Environmental permits and paperwork of the hazard prevention plan
- +
- Measurement of air pollutants in discharge facilities